CEA-2006 Primary Ratings Power Output 50Watts RMS x 4 at 4 Ohms and ≤1%THD+N
+ 300Watts RMS x 1
Signal-to-Noise Ratio 80dBA (Reference: 1Watt into 4Ohms)
Maximum Power Output MAX POWER 1600W
Power Output Rated Power at 14.4V 50Watts RMS x [ch] (4 Ohms, 20-20kHz, ≤1.00% THD)
75Watts RMS x [ch] (2 Ohms, 1kHz, ≤1.00% THD)
300Watts RMS x [ch] (4 Ohms, 20-200Hz, ≤0.50% THD) OTHER CHANNEL
500Watts RMS x [ch] (2 Ohms, 100Hz, ≤0.50% THD) OTHER CHANNEL
150Watts RMS x [ch/2] (Bridged 4 Ohms, 1kHz, ≤1.00% THD)
Specifications Signal to Noise Ratio 100dB (Reference: Rated Power into 4Ohms at 14.4V)
Frequency Response 20Hz-50kHz (+0dB, -3dB)
20Hz-200Hz (+0dB, -3dB) OTHER CHANNEL
Input Impedance 10k ohm
Speaker Impedance 4Ω (2Ω to 8Ω allowable)
Bridged connection 4Ω to 8Ω allowable
Audio Section Low-Pass Filter Built in Variable Low-Pass Filter (50Hz-200Hz, -24dB/oct)
High-Pass Filter Built in Variable High-Pass Filter (50Hz-200Hz, -12dB/oct)
Bass Boost Built in Bass Boost Control (40Hz, 0dB-+18dB)
RCA Input Sensitivity 0.2[V] - 5.0 [V]
Speaker Level Input Sensitivity 4.0[V] - 12.0 [V]
Terminals Battery & Ground Screw Type Terminal Block (Nickel colored) (M6)
Speaker Output Screw Type Terminal Block (Nickel colored) (M4)
Line In RCA (Nickel colored)
Speaker Input RCA IN A Channel
RCA IN B Channel
General Dimensions(WxHxD) 229 [mm] x 55 [mm] x 187 [mm]
9 inch x 2-3/16 inch x 7-3/8 inch
Operating Voltage 14.4V(11-16V allowable)
Current Consumption 58 [A]
Key Features CEA-2006 Compliant
Class D
2 Ohms Load Capability
Speaker Level Input
Signal Sensing Turn-on
Terminal Cover
Power MOS-FET Switching Power Supply
Extruded Aluminum Heat Sink Design
A B Sub Independent Gain Adjustment
A B AB(Mix) Independent Gain Adjustment