| Amplifier Type | Class D | ||
|---|---|---|---|
| CEA-2006 Primary Ratings | Power Output | 500Watts RMS x 1 at 4 Ohms and ≤1%THD+N | |
| Signal-to-Noise Ratio | 76dBA (Reference: 1Watt into 4Ohms) | ||
| Maximum Power Output | MAX POWER | 1800W | |
| Maximum Power Output | 1800W x 1 | ||
| Power Output | Rated Power at 14.4V | 500Watts RMS x [ch] (4 Ohms, 20-200Hz, ≤1.0% THD) 900Watts RMS x [ch] (2 Ohms, 100Hz, ≤1.0% THD) Over 900Watts x [ch] (1Ohm) |
|
| Specifications | Signal to Noise Ratio | 100dB (Reference: Rated Power into 4Ohms at 14.4V) | |
| Frequency Response | 10Hz-200Hz (+0dB, -3dB) | ||
| Input Impedance | 10k ohm | ||
| Audio Section | Low-Pass Filter | Built in Variable Low-Pass Filter (50Hz-200Hz, -24dB/oct) | |
| Bass Boost | Built in Bass Boost Control (40Hz, 0dB-+18dB) | ||
| Phase Inverter | 0°(Normal)-180°(Reverse) | ||
| Input Sensitivity Control | 0.2 [V] - 5.0 [V] | ||
| Terminals | Battery & Ground | Screw Type Terminal Block (M6) (Gold Colored) | |
| Speaker Output | Screw Type Terminal Block (M4) (Gold Colored) | ||
| Line In | RCA (Gold Colored) | ||
| Line Out | RCA (Gold Colored) | ||
| Speaker Input | JST Connector | ||
| General | Dimensions(WxHxD) | 350 [mm] x 59 [mm] x 238 [mm] 13-3/4 inch x 2-5/16 inch x 9-3/8 inch |
|
| Weight (kg) |
3.3 [kg] 7.2 [lbs] | ||
| Operating Voltage | 14.4V（11-16V allowable） | ||
| Current Consumption | 57 [A] | ||
| Key Features | CEA-2006 Compliant Digital Amplifier Technology Dual Mono Drive Ready 1 Ohm Load Capability Speaker Level Input Signal Sensing Turn-on Power MOS-FET Switching Power Supply Cast Aluminum Heat Sink Design Single-side Exposure of Terminals for Multi-Installation Gold Plated Power & Speaker Terminal Line Output Terminals for Extension |
||
