Software which the MCP-6A can open the data file. Last updated : November 15, 2013
 
The MCP-6A can retrieve memory channel frequencies by opening ([File] → [Open]) data files which are created by the following KENWOOD Memory Control Programs.
Software (Data file extension) Available Transceiver Notes
MCP-5A (*.mc5) TH-K20A / TH-K20E
TH-K40A / TH-K40E
 
MCP-4A (*.mc4) TH-D72A / TH-D72E  
MCP-2A (*.mc2) TM-V71A / TM-V71E
TM-D710A / TM-D710E
 
MCP-1A (*.mcp) TH-K2AT / TH-K2E/ TH-K2ET /
TH-K4AT / TH-K4E
TM-271A / TM-271E / TM-471A
TM-281A / TM-281E / TM-481A
 
MCP-F6/F7 (*.fx) TH-F6A / TH-F7A / TH-F7E Memory channel data which is out of the TM-D710GA/GE's frequency range cannot be retrieved.
MCP-2000 (*.2k0) TS-2000 / TS-2000X / TS-B2000 Memory channel data which is out of the TM-D710GA/GE's frequency range cannot be retrieved.
MCP-D700 (*.700) TM-D700A / TM-D700E  
MCP-D7G (*.d7g) TH-D7A(G) / TH-D7A(G2.0) /
TH-D7E(G2.0)
 
MCP-D7 (*.d7) TH-D7A / TH-D7E /
TH-D7E(Ver.2.0)
 
 
The following Memory Control Programs are released only for USA market, and available for download from KENWOOD U.S.A. website.
Software (Data file extension) Available Transceiver Notes
MCP-G707 (*.707) TM-G707A (USA model) PG-4S (programming cable for the TM-V7A/G707A) is only available in USA market.
MCP-V7 (*.v7) TM-V7A (USA model)
MCP-G71 (*.71) TH-G71A (USA model) PG-4P (programming cable for the TH-G71A) is no longer available but PG-4Y can be used instead.
 
Notes
The MCP-6A can neither read data from nor write data to the above transceivers directly.
DTMF memory or other menu data is not retrieved from above data files to the MCP-6A.
(The MCP-6A retrieves only memory channel frequency data)