TKR-D710/810

GENERAL Repeater
TKR-D710 TKR-D810
Frequency Range 136-174 MHz 406 - 470 MHz
Max. Channels Per Radio 30
Channel Spacing Analog 25*/12.5 kHz
Digital 12.5 kHz
Current Drain Standby 0.5 A
Receive 1.0 A
Transmit 11.0 A
TX Power Duty 50% 50 W 40 W
100% 25 W
Operating Voltage 13.6 VDC ±15%
Operating Temperature -22°F to +140°F (-30°C to +60°C)
Frequency Stability ±1.0 ppm
Antenna Impedance 50 Ohms
Dimensions (W x H x D)
Projections Not Included
19.0 x 3.5 x 13.3 in. (483 x 88 x 340 mm)
Weight (net) 21.4 lb (9.7 kg)
RECEIVER TKR-D710 TKR-D810
Sensitivity Digital @ 12.5 kHz (3% BER) 0.28 μV
Digital @ 12.5 kHz (1% BER) 0.32 μV
Analog (12 dB SINAD) 0.28 μV
Selectivity Analog @ 25* / 12.5 kHz 83 dB / 77 dB 80 dB / 74 dB
FM Hum & Noise Analog @ 25* / 12.5* kHz 55 dB / 50 dB
Spurious Rejection Analog 90 dB
Audio Distortion (Ext.SP) Less than 2.5% at 1000 Hz
Audio Output Power (Ext.SP) $ W (at 4 Ohms less than 5% distortion)
TRANSMITTER TKR-D710 TKR-D810
RF Power Output Power 50 - 5 W 40 - 5 W
Modulation Limiting  Analog @ 25* / 12.5* kHz ± 5.0 kHz / ± 2.5 kHz
Spurious & Harmonics 80dB
FM Hum & Noise Analog @ 25* / 12.5* kHz 55 dB / 50 dB
Modulation Distortion Less than 1% at 1000 Hz
Emission Designator 16K0F3E, 11K0F3E, 7K60FXD, 7K60FXE

*25 kHz is not included in the models sold in the USA or US territories. Measurements made per CAI measurement procedures (digital) and TIA 603 (analog); specifications shown are typical.
Details and timing of firmware and software updates are subject to change without notice. Specifications are subject change without notice, due to advancements in technology.


APPLICABLE MIL-STD & IP
MIL Standard Methods/ Procedures
810C 810D 810E 810F 810G
High Temperature 501.1/ I, II 501.2/ I, II 501.3/ I, II 501.4/ I, II 501.5/ I, II
Low Temperature 502.1/ I 502.2/ I, II 502.3/ I, II 502.4/ I 502.5/ II
Temp. Shock 503.1/ I, II 503.2/ I, II 503.3/ I, II 503.4/ I, II 503.5/ II