KAC-8405

Amplifier Type Class AB
CEA-2006 Primary Ratings Power Output 60Watts RMS x 4 at 4 Ohms and ≤1%THD+N
Signal-to-Noise Ratio 80dBA (Reference: 1Watt into 4Ohms)
Maximum Power Output MAX POWER 720W
Maximum Power Output 180W x 4
Power Output Rated Power at 14.4V 60Watts RMS x [ch] (4 Ohms, 20-20kHz, ≤0.08% THD)
90Watts RMS x [ch] (2 Ohms, 1kHz, ≤0.8% THD)
180Watts RMS x [2ch] (Bridged 4 Ohms, 1kHz, ≤0.8% THD)
Specifications Signal to Noise Ratio 95dB (Reference: Rated Power into 4Ohms at 14.4V)
Frequency Response 5Hz-50kHz (+0dB, -3dB)
Input Impedance 10k ohm
Audio Section Low-Pass Filter Built in Variable Low-Pass Filter (50Hz-200Hz, -12dB/oct)
High-Pass Filter Built in Variable High-Pass Filter (50Hz-200Hz, -12dB/oct)
Bass Boost (only B ch) Built in Bass Boost Control (40Hz, 0dB/+18dB)
Input Sensitivity Contro 0.2 [V] - 5.0 [V]
Operation Switch ST/MONO
Terminals Battery & Ground Screw Type Terminal Block (M4) (Gold Colored)
Speaker Output Screw Type Terminal Block (M4) (Gold Colored)
Line In RCA (Gold Colored)
Speaker Input JST Connector
General Dimensions(WxHxD) 280 [mm] x 59 [mm] x 238 [mm]
11 inch x 2-5/16 inch x 9-3/8 inch
Weight  (kg)
2.8 [kg] 6.1 [lbs]
Operating Voltage 14.4 [V](11-16V allowable)
Current Consumption 34 [A]
Key Features CEA-2006 Compliant
Speaker Level Input
Signal Sensing Turn-on
Power MOS-FET Switching Power Supply
Cast Aluminum Heat Sink Design
Single-side Exposure of Terminals for Multi-Installation
Gold Plated Power & Speaker Terminal