The information for each vehicle above was investigated by JVCKENWOOD Asia Headquaters, and may not cover all of the connector types.
Please contact your local KENWOOD Electronics dealers for details.
*Location of Steering Remote Connector
If the vehicle is equipped with an OEM steering remote controller, the steering remote connector is commonly located in the console.
*How to view Steering Remote Connector
All steering wheel remote controls above are vehicle side connectors and drawn from the side.
(view indicated by arrow)
*Steering Remote Cable
(included in the unit)
1) Look for a steering remote connector that is the same shape as in the image above in the console.
2) Connect “Input 1”, “Input 2” and “ST REMOTE GND” to the pins shown in matching colors on the above list of connectors.
HOW TO OPEN THE SET-UP SCREEN.
ex)DDX7016BT
1) Press this icon.
2) Press "SETUP"
3) Select "System"
4) Select "User Interface"
5) Select "Steerig Remote Controller"
HOW TO SYNC THE OEM STEERING REMOTE FUNCTION.
1) Press and hold the "Volume Up" button
2) This icon appears.
3) Press "Volume Up Icon"
4) The functions will be syncronize
5) Repeat the same procedure.
