|
Welcome
Thank you for choosing the KENWOOD TM-D750A/E transceiver. By utilizing this software, you can enjoy the versatility of the TM-D750A/E transceiver through the memory channel management or edit functions.
About this software
You can use the MCP-D750 to create data such as memory channels and menus on a PC by connecting the TM-D750A/E to the PC by using a USB cable (USB Type-C) or the Bluetooth function.
The MCP-D750 can retrieve memory channel frequencies by opening ([File] → [Open]) data files which are created by the KENWOOD Memory Control Programs. Refer to the MCP-D750 Help File for details.
About virtual COM port driver for the TM-D750A/E
A virtual COM port driver needs to be installed onto the PC to use the MCP-D750
ATTENTION:Do not connect the transceiver to a PC before installing the virtual COM port driver.
Operating Environments
1. Operating System (OS)
Windows 11
Notes:
This software is designed to run on the above operating system.
Arm64 is not supported.
Applicable operating systems are subject to change without notice due to the end of the technical support by Microsoft Corporation or change of the product specifications.
2. Processor
Faster than the recommended CPU for the OS.
3. System Memory (RAM)
Larger than the recommended system memory for the OS.
4. Free Hard Drive Space
100 MB or more of free hard drive space.
5. Peripheral Devices
A display with resolutions higher than SXGA (1280 x 1024).
A keyboard and a mouse, or other pointing devices.
USB 2.0 port or Bluetooth function that conforms to SPP (Serial Port Profile).
Attention
Before starting to edit the data in the MCP-D750, you must first "Read" data from the transceiver. (The MCP-D750 must recognise the exact model type of the transceiver.) Writing data to the transceiver without reading the transceiver's exact model type, may result an error.
When you exchange the channel data between different model types such as "TM-D750A and TM-D750E", please use the MCP-D750's Import / Export function.(Please refer to the MCP-D750's help file for detail)
Turn the transceiver OFF before connecting it to a PC.
You cannot connect the TM-D750A/E to a PC COM port via an RS-232C cable.
Notes on usage
Users are prohibited to assign, rent, lease, redistribute, or resell the software.
Users are prohibited to revise, change, translate, merge, de-compile, or reverse engineer the software.
JVCKENWOOD Corporation does not warrant that quality and functions of this software comply with each user's purpose of use of this software, and unless specifically described in this document, JVCKENWOOD Corporation shall be free from any responsibilities to any defects and indemnities to any damages or losses. Selection and installation of this software shall be done by the user's own designation. The user shall take full responsibility for the use and effects of this software.
JVCKENWOOD Corporation shall be free from any responsibilities for any incidental losses or damages, such as missing communications or a call opportunity, caused by a failure or performance error of this software.
JVCKENWOOD Corporation shall own all copyrights and other intellectual properties for the software and all manuals and documents attached to the software. The user shall be allowed to use, not to resell, the software by obtaining a license from JVCKENWOOD Corporation. While the media on which the software is stored is possessed by the user, the ownership for the software itself shall be reserved for JVCKENWOOD Corporation.
Installing the MCP-D750
Extract the downloaded file "MCP-D750_V100.zip" into a designated folder.
In the designated folder, a folder labeled "MCP-D750_V100" will be created.
Execute the "setup.exe" in the folder labeled "MCP-D750_V100", and follow the instructions that appear on the display to install MCP-D750.
Notes:
The MCP-D750 does not operate properly when selecting other models; you must select the correct model.
The MCP-D750 automatically creates a data folder as "...\Documents\JVCKENWOOD Corporation\MCP-D750".
Administrator privileges are required when installing the MCP-D750.
Uninstalling the MCP-D750
Select "MCP-D750" in "Uninstall a program" in the Control Panel and follow the instructions that appear on the display to uninstall the software. Or double-click "setup.exe", and follow the instructions that appear on the display to uninstall the software.
Notes:
Created files using the MCP-D750 are not deleted by uninstalling the software; you must manually delete any files that you created.
The MCP-D750 automatically creates a data folder as "...\Documents\KENWOOD\MCP-D750".
Administrative privileges are required to uninstall the MCP-D750.
Always exit the MCP-D750 before uninstalling the software.
Update History
Ver.1.00 (August 26, 2026)
First Release
If you agree with the details listed above, click the following link to download the MCP-D750 software.
Download MCP-D750 Version 1.00 (filename: MCP-D750_V100.zip; file size : 8.34MB)
Windows® is a registered trademark or trademark of Microsoft Corporation in the United States and other countries.
The Bluetooth® word mark and logo are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.
USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum
