TS-2000/TS-2000X/TS-B2000
How to check the firmware version
 
 
You can check the firmware version of your TS-2000(X)/B2000 by following procedure.
 
TS-2000/TS-2000X
1)  Turn the transceiver ON while pressing the [MIC] key and [NR] key to enter Checksum confirmation mode.
2)  The Checksum of the firmware appears on the main 7 segment display.
 
3)  Turn the transceiver OFF to exit Checksum confirmation mode.
TS-B2000 (Optional RC-2000 mobile controller is necessary)
1)  Turn the transceiver ON while pressing the [1MHz] key and [DOWN] key to enter Checksum confirmation mode.
2)  The Checksum of the firmware appears in the center of the RC-2000's display.
 
3)  Turn the transceiver OFF to exit Checksum confirmation mode.
Click to see the firmware revision history.
If you have any enquiries, click the link below.
http://www.kenwood.com/i/contact.html
 
<BACK
NEXT>