TS-2000/TS-2000X/TS-B2000
Firmware revision history
 
 
Applicable models : TS-2000 K/E/E2, TS-B2000 K/E/E2, TS-2000X K/E
(Not applicable to the Japanese models TS-2000S/SX/TS-2000V/VX)
 
The latest firmware includes all previous updates.
 
[Revision 15]
Checksum = EFBA : The latest firmware.
Applied from S/No.B59xxxxx approx.
User firmware update software : TS-2000 Ver.1.12 (28/July/2015 released)
  Revised the following symptom.
  When using a single lever paddle, the internal electronic keyer occasionally generates extra dots or dashes.
[Revision 14]
Checksum = 2BF7
Applied from S/No.B3Cxxxxx approx.
User firmware update software : TS-2000 Ver.1.11 (15/November/2013 released)
  Revised the following symptom.
  When DSP filter settings are changed using the ARCP-2000 software, RX audio might be distorted until the RX frequency or mode is changed.
[Revision 13]
Checksum = 5355
Applied from S/No.B27xxxxx approx.
User firmware update software : TS-2000 Ver.1.10 (14/September/2012 released)
  Revised the following symptom.
  When changing the memory frequency temporary, auto zero-beat (CW tune) function might not wok correctly.
[Revision 12]
Checksum = 8BC9
Applied from S/No.B13xxxxx approx.
User firmware update software : TS-2000 Ver.1.09 (30/June/2011 released)
  Updated the following item.
  Enabled the backup of Auto Mode frequency points when Partial Reset is executed as well as Memory channel data or Menu settings.
[Revision 11]
Checksum = 8119
Applied from S/No.003xxxxx approx.
User firmware update software : TS-2000 Ver.1.08 (18/July/2008 released)
  Updated the following item.
Applied electrical compatibility with new component devices as well as discontinued component devices used in the 1200MHz unit (UT-20).
(There is no functional change)
[Revision 10]
Checksum = 89F6
Applied from S/No.001xxxxx approx.
User firmware update software : TS-2000 Ver.1.07 (10/June/2008 released)
  Updated the following item.
Applied electrical compatibility with new component devices as well as discontinued component devices.
(There is no functional change)
[Revision 9]
Checksum = AF27
Applied from S/No.903xxxxx approx.
User firmware update software : TS-2000 Ver.1.06 (6/September/2007 released)
  Updated the following items.
1: For ARISS split frequency operation, enabled direct frequency input (by means of PC commands) during TX in normal operation mode as well as SATL mode.
2: Automatic Repeater Offset setting information is read when [A/B] key or [+]/[-] (Band select) key is pressed.
  Revised the following symptoms.
1: VS-3 (Optional Voice Synthesizer Unit) generates unnecessary announcement when Auto Mode is turned on.
2: Reverse function may not work correct when [A/B] key is pressed.
[Revision 8]
Checksum = 1D3F (1d3F)
Applied from S/No.804xxxxx approx.
User firmware update software : TS-2000 Ver.1.05(11/December/2006 released)
  Revised the following symptom.
Frequency step may change when a Quick Memory is registered after turned the main encoder knob to the anticlockwise direction.
[Revision 7]
Checksum = BDEF (bdEF)
Applied from S/No.612xxxxx approx.
User firmware update software : TS-2000 Ver.1.04(28/January/2005 released)
  Updated the following features.
1: 7MHz band TX range is expanded to "7000kHz-7200kHz" for the TS-2000 E/E2, TS-B2000 E/E2, and TS-2000X E (European models).
2: FM sub-audible tone functions (TONE/CTCSS/DCS) can be enabled in Satellite mode.
  [Notes]
*Although the sub-audible tone functions On/Off status is stored in each Satellite memory channel, the tone frequency/code cannot be stored due to the limited memory capacity.The tone frequency/code configuration from the normal VFO (VFO-A or VFO-B) is used instead.(The different tone frequency/code configuration can be stored in the HF, 50 MHz, 144 MHz, 430 MHz and 1.2 GHz band VFOs separately)
  *Encoding and decoding is performed according to the data from the uplink frequency.
*The tone frequency/code search function cannot be operated in Satellite mode.
[Revision 6]
Checksum = 4611
Applied from S/No.506xxxxx approx.
User firmware update software : TS-2000 Ver.1.03(1/August/2003 released)
  Revised the following symptoms.
1: The APO (Auto Power OFF) timer is not reset by pressing PTT.
2: After pressing the microphone's up/down switch, up/down operation on the ARCP-2000 may not work correctly.
[Revision 5]
Checksum = BB7D (bb7d)
Applied from S/No.405xxxxx approx.
User firmware update software : TS-2000 Ver.1.02(12/September/2002 released)
  Revised the following symptom.
The S-meter flickers in FM mode when the LO/WIDTH knob or the HI/SHIFT knob is turned.
[Revision 4]
Checksum = 8BD6 (8bd6)
Applied from S/No.309xxxxx approx.
  Revised the following symptoms.
1: In satellite mode, the frequency step information may not be displayed correctly.
2: In satellite mode, QUICK MEMORY READ seldom displays vacant memory channels.
[Revision 3]
Checksum = F095 (f095)
Applied from S/No.301xxxxx approx.
User firmware update software : TS-2000 Ver.1.00(29/June/2001 released)
  Revised the following symptoms.
1: If the PTT function is set to the sub band while writing to the main band memory, mode information may not be recorded correctly.
2: If the SATL key is pressed to engage satellite mode while repeater operation is still in progress, the transceiver may not function properly.
[Revision 2]
Checksum = 6D7A (6d7A)
Applied from S/No.212xxxxx approx.
  Revised the following symptom.
When performing satellite operations, direct frequency input (by means of PC commands issued via the COM port) is not possible during an uplink.
[Revision 1]
Checksum = A89D (A89d)
Applied from S/No.209xxxxx approx.
  Revised the following symptom.
"A.NOTCH" and "B.C." icons remain on display when changed to CW/FSK mode.
[Revision 0]
Checksum = 0DC6 (0dC6) : Original firmware.
Applied from S/No.208xxxxx.(From the first production)
If you have any enquiries, click the link below.
http://www.kenwood.com/i/contact.html
<BACK