Support

NX-920G

NEXEDGE® 800MHz Digital & FM Mobile Radios NX-920G

General Features

15W (806-870 MHz) RF Power Output
260 CH-GID / 128 Zones
10 Character Alphanumeric Aliases
Backlit LCD & Keys
Function / Status LCD Icons
Transmit / Busy / Call Alert / Warn LED
Blue Function / Status LED
On / Off Power Control
4 Up / Down Selectors
6 Front PF Keys
Emergency / AUX Key
4W Speaker Audio
Zone / CH Number Voice Announcement
DB-15 Accessory Connector
6 Programmable AUX I / Os
KPG-141D Windows® FPU
Flash Firmware Upgrading
MIL-STD-810 C/D/E/F/G
IP54 Water & Dust Intrusion
PC Serial Interface
SDM Manual Input*1
Transparent Data Mode*1
Built-in GPS Receiver Model: NX-920GG
Available (Optional KRA-40G GPS Active
Antenna required for GPS functions)

Digital-General

NXDN® Digital Air Interface
AMBE+2™ VOCODER
6.25 & 12.5 kHz Channels
Over-the-Air Alias
Over-the-Air Programming*2
Paging Call
Emergency Call
All Group Call
Status Messaging*1
Remote Stun / Kill*1
Remote Check*1
Short & Long Data Messages*1
GPS Location with Voice*1
NXDN® Scrambler Included

Digital-Conventional Mode

64 Radio Access Numbers (RAN)
Individual & Group Selective Call
Mixed FM / Digital Operation
Conventional IP Networks
Site Roaming

Digital-Trunkking Mode

Individual Private Call
Group Call & Broadcast Call
Telephone Interconnect*3
Transmission Trunked Mode*3
Message Trunked Mode*3
Call Queuing with Priority*3
Late Entry (UID & GID)*3
4 Priority Monitor ID’s*3
Remote Group Add*1
Failsoft Mode

Multi-Site IP Network Compatible

60,000 GIDs / UIDs
Wide Area Group Call
Auto Roaming Registration
Group Registration

Multi-System Compatible

8 Trunked Networks*4
UID Lists for Each Network

SCAN

Single Zone / Multi-Zone / List Scan
Single Priority Scan (Conventional)

FM Modes-General

25 & 12.5 kHz Channels
NPSPAC Channels
Conventional & LTR® Zones
FleetSync® / II, MDC-1200, DTMF
QT / DQT (Conventional Zones Only)
Voice Inversion Scrambler (16 Codes)

FleetSync ® / II (FM)

PTT ID ANI / Caller ID
Selective / Group Call
Emergency, Status & Test Messages*1

MDC-1200

PTT ID ANI / Caller ID*3
Emergency, Radio Check & Inhibit


  • *1 Requires NX subscriber unit PC Serial Interface compatible software application
    (e.g KENWOOD AVL & Dispatch Messaging software) or hardware (e.g. console).
  • *2 Requires KENWOOD OTAP Management software.
  • *3 These trunked features are primarily for system programming and operational dependent.
    Priority Monitor also requires NX subscriber settings.
  • *4 Up to 8 different Trunked Networks can be configured per radio (each in a zone).