Support

NX-200s/300s

SPECIFICATIONS

GENERAL NX-3220 NX-3320
Frequency Range 136-174 MHz 400 - 520 MHz
Max. Channels per Radio Up to 1000 channels with option
Number of Channels 260 (64 for no LCD models)
Number of Zones 128 (4 for no LCD models)
Channel Spacing Analog 12.5/15/20/25*1/30*1 kHz 12.5/25*1 kHz
Digital 6.25/12.5 kHz 6.25/12.5 kHz
Power Supply 7.5 V DC +-20 %
Battery Life
(FDMA/TDMA) 5-5-90
With KNB-55L (1,480 mAh) Approx. 8 hours / Approx. 9.5 hours
With KNB-56N (1,400 mAh) Approx. 8 hours / Approx. 9 hours
With KNB-57L (2,000 mAh) Approx. 11 hours / Approx. 13.5 hours
Operating Temperature -22°F to +140°F (-30°C to +60°C)
Frequency Stability +- 2.0 ppm +- 1.0 ppm
Dimensions (W x H x D)
*Projection not included *2
Radio only 2.20 x 4.71 x 1.43 in (56 x 119.6 x 36.4 mm)
With KNB-55L 2.20 x 4.71 x 1.43 in (56 x 119.6 x 36.4 mm)
With KNB-56N 2.20 x 4.71 x 1.68 in (56 x 119.6 x 42.7 mm)
With KNB-57L 2.20 x 4.71 x 1.53 in (56 x 119.6 x 39 mm)
Weight (net) *3 Radio only 7.8 oz (220 g)
With KNB-55L 11.1 oz (315 g)
With KNB-56N 14.5 oz (410 g)
With KNB-57L 12.0 oz (340 g)
FCC ID K44479000 K44479100
IC Certification 282F-479000 282F-479100
RECEIVER NX-3220 NX-3320
Sensitivity NXDN 6.25 kHz Digital, 3 % BER 0.20 μV
NXDN 12.5 kHz Digital, 3 % BER 0.25 μV
DMR 12.5 kHz Digital, 5 % BER 0.30 μV
DMR 12.5 kHz Digital, 1 % BER 0.45 μV
Analog, 12 dB SINAD 0.25 μV
Selectivity Analog @ 12.5 kHz 65 dB
Analog @ 25 kHz 72 dB
Intermodulation 70 dB
Spurious Rejection 70 dB
Audio Distortion 3%
Audio Output 3 % Distortion 500 mW/8 Ohms
*Internal Speaker 5 % Distortion 1000 mW/8 Ohms
TRANSMITTER NX-3220 NX-3320
RF Power Output 5 W/4 W/1 W
Spurious Emission -70 dB
FM Hum & Noise Analog @ 25 kHz 45 dB
Analog @ 12.5 kHz 40 dB
Audio Distortion 3%
Digital Protocol ETSI TS 102 361-1, -2, -3
Emission Designator 16K0F3E *1, 11K0F3E, 8K30F1E, 8K30F1D, 8K30F7W, 7K60FXD, 7K60FXE, 4K00F1E, 4K00F1D, 4K00F7W, 4K00F2D

*1 25 and 30 kHz are not included in the models sold in USA or US territories.
*2 Full Keypad/Std Keypad Models
*3 Full Keypad Model Analog measurements made per TIA603.
Specifications are measured according to applicable standards.
Specifications shown are typical and subject to change without notice, due to advancements in technology.

APPLICABLE MIL-STD & IP

MIL Standard  Methods / Procedures
810C 810D 810E 810F 810G
Low Pressure 500.1/ I 500.2/ I, II 500.3/ I, II 500.4/ I, II 500.5/ I, II
High Temperature 501.1/ I, II 501.2/ I, II 501.3/ I, II 501.4/ I, II 501.5/ I, II
Low Temperature 502.1/ I 502.2/ I, II 502.3/ I, II 502.4/ I, II 502.5/ I, II
Temp. Shock 503.1/ I 503.2/ I 503.3/ I 503.4/ I, II 503.5/ I
Solar Radiation 505.1/ I 505.2/ I 505.3/ I 505.4/ I 505.5/ I
Rain* 506.1/ I, II 506.2/ I, II 506.3/ I, II 506.4/ I, III 506.5/ I, III
Humidity 507.1/ I, II 507.2/ II, III 507.3/ II, III 507.4 507.5/ II
Salt Fog 509.1/ I 509.2/ I 509.3/ I 509.4 509.5
Dust 510.1/ I 510.2/ I 510.3/ I 510.4/ I, III 510.5/ I
Vibration 514.2/ VIII, X 514.3/ I 514.4/ I 514.5/ I 514.6/ I
Shock 516.2/ I, II, V 516.3/ I, IV 516.4/ I, IV 516.5/ I, IV 516.6/ I, IV
International Protection Standard
Dust & Water* IP54, IP55, IP67

*Audio accessory connector must be covered.