Where to Buy
Support

XR600-6DSP

CTA-2006 Primary Ratings Power Output 75Watts RMS x 6 at 4 Ohms and ≤1%THD+N
Signal-to-Noise Ratio 81dBA (Reference: 1Watt into 4Ohms)
Maximum Power Output MAX POWER 1200W
Power Output 6 channel
Rated Power at 14.4V
75Watts RMS x [ch] (4 Ohms, 20-20kHz, ≤1.00% THD)
100Watts RMS x [ch] (2 Ohms, 1kHz, ≤1.00% THD)
200Watts RMS x [ch/2] (Bridged 4 Ohms, 1kHz, ≤1.00% THD)
* Bridged connection available CH1 & CH2, CH3 & CH4, CH5 & CH6
Specifications Signal to Noise Ratio 95dB (Reference: Rated Power into 4Ohms at 14.4V)
Frequency Response 20Hz-50kHz (+0dB, -3dB)
Input Impedance 10k ohm
Speaker Impedance Bridged connection 4Ω to 8Ω allowable
Audio Section Input Sensitivity 2.0[V] - 4.0[V]
Terminals Battery & Ground capable for 4 guage
Speaker Output capable for 8 guage
Line In 18P Connector
DSP Ajasted Line OUT RCA (Gold colored)
I/F ADS I/F (4P) Connector
INPUT / OUTPUT SIGNAL INTERFACE INPUT
Channel 1 for Audio Signal
Channel 2 for Audio Signal
Channel 3 for Audio Signal
Channel 4 for Audio Signal
Channel 5 for Information Signal
Channel 6 for Information Signal
OUTPUT
Channel 1 for Speaker L channel
Channel 2 for Speaker R channel
Channel 3 for Speaker L channel
Channel 4 for Speaker R channel
Channel 5 for Speaker L channel
Channel 6 for Speaker R channel
Channel 7 for RCA L channnel
Channel 8 for RCA R channnel
Channel 9 for RCA L channnel
Channel 10 for RCA R channnel
General Dimensions(WxHxD) 320 [mm] x 51 [mm] x 169 [mm]
12-5/8 inch x 2 inch x 6-5/8 inch
Operating Voltage 14.4V(11-16V allowable)
Current Consumption 60 [A]
Key Features CTA-2006 Compliant
Class D
2 Ohms Load Capability
Terminal Cover
Cooling Fan
Power MOS-FET Switching Power Supply
Extruded Aluminum Heat Sink Design
Digital Signal Processor Function
DSP Setting Apprication (iOS/Andorid)